Flip-Flop Driver > Mode 20

Uses two switches. One to enable, one to disable.

[DL/DN]:<DRIVER_ID>,<TRIGGER>,<SWITCH_ID_ON>,<20>,<SWITCH_ID_OFF>,<PWM1_MAXONTIME>,<PWM1>,<PWM2>,<RESTTIME><CR>

 

• <DRIVER_ID>
  • FAST Driver number, zero based.
• <TRIGGER>
  • 0x00 = Disabled
  • 0x01 = FLIP Switch True, Flop Switch True
  • 0x11 = FLIP Switch False, Flop Switch True
  • 0x21 = FLIP Switch True, Flop Switch False
  • 0x31 = FLIP Switch False, Flop Switch False
  • 0xC1 = Virtual Switch True (causes FLIP)
  • 0x81 = Virtual Switch False (causes Flop)
• <SWITCH_ID_ON>
  • FAST Switch number, zero based, which turns on flipflop.
• <MODE>
  • 0x20 = FlipFlop
• <SWITCH_ID_OFF>
  • FAST Switch number, zero based, which turns off flipflop.
• <PWM1_MAXONTIME>
  • PWM1 Max On-Time in Milliseconds (HEX)
• <PWM1>
  • ***See PWM Byte Sequence Table***
• <PWM2>
  • ***See PWM Byte Sequence Table***
• <RESTTIME>
  • Rest Time in Milliseconds (HEX)

 

Flip-Flop Driver Comments

• One-Shot will only trigger disable
• Both switches must return false for cycle to repeat
• Manual on will act as if the enable switch has been activated.
• Manual off will act as if the disable switch has been activated