Auto Triggered Diverter with exit Switch > Mode 75

This driver is triggered by Switch_ID, and will run until the drive on time 1 expires, or switch ID off is triggered.  On Shot will stop the event, not start it

 

[DL/DN]:<DRIVER_ID>,<TRIGGER>,<SWITCH_ID_ENTER>,<75>,<SWITCH_ID_EXIT>,<FULLPOWER_ONTIME>,<PWM2_ONTIMEx100mS>,<PWM2><RESTTIME><CR>

 

• <DRIVER_ID>
  • FAST Driver number, zero based.
• <TRIGGER>
  • 0x00 = Disabled
  • 0x01 = Enter Switch True, and Exit Switch True
  • 0x11 = Enter Switch False, and Exit Switch True
  • 0x21 = Enter Switch True, and Exit Switch False
  • 0x31 = Enter Switch False, and Exit Switch False
  • 0xC1 = Virtual Switch True
  • 0x81 = Virtual Switch False
• <SWITCH_ID_ENTER>
  • FAST Switch number, zero based.
• <MODE>
  • 0x70 = Diverter
• <SWITCH_ID_EXIT>
  • FAST Switch number, zero based On Local Node (not based on system number)
• <FULLPOWER_ONTIME>
  • Driver On-Time in Milliseconds at Full Power (HEX)
• <PWM2_ONTIMEx100mS>
  • PWM2 On-Time X 100 Milliseconds (HEX)
• <PWM2>
  • ***See PWM Byte Sequence Table***
• <RESTTIME>
  • Rest Time in Milliseconds (HEX)